Tektronix 4 Series B MSO Mixed Signal Oscilloscope

The 4 Series B MSO sets a new standard for performance, analysis capabilities and overall user experience in bench oscilloscopes — ideal for debugging and validating embedded systems and power converters. The second generation of this instrument incorporates a new processing platform, more than doubling its responsiveness, and significantly accelerating measurements and data transfers with full support for remote operation and control. Models are available with 4 or 6 FlexChannel® inputs for high visibility into designs. High-resolution 12-bit sampling delivers precise measurements on a new higher-contrast 13.3-inch HD display. And synchronized, multi-channel spectrum analysis facilitates noise hunting and RF measurements. This exceptional measurement performance is paired with an intuitive award-winning user interface making it easy to achieve fast, accurate results.

Category: Tags: , , ,
Model Analog Bandwidth Analog Channels Digital Channels Sample Rate Record Length
MSO44B 200 MHz to 1.5 GHz 4 Up to 32 (optional) 6.25 GS/s 31.25 M to 62.5 M
MSO46B 200 MHz to 1.5 GHz 6 Up to 48 (optional) 6.25 GS/s

 

 31.25 M to 62.5 M
MSO46 200 MHz to 1.5 GHz 6 Up to 48 (optional) 6.25 GS/s

 

 31.25 M to 62.5 M
MSO44 200 MHz to 1.5 GHz 4 Up to 32 (optional) 6.25 GS/s

 

 31.25 M to 62.5 M

 

Key performance specifications
    • Input channels

    – 4 or 6 FlexChannel® inputs

    – Each FlexChannel provides:

    • One analog signal that can be displayed as a waveform view, a spectrum view, or both simultaneously
    • Eight digital logic inputs with TLP058 logic probe
    • Bandwidth (all analog channels)

    – 200 MHz, 350 MHz, 500 MHz, 1 GHz, 1.5 GHz (upgradable)

    • Sample rate (all analog / digital channels)

    – Real-time: 6.25 GS/s

    • Record length (all analog / digital channels)

    – 31.25 Mpoints standard (62.5 Mpoints optional upgrade)

    • Waveform capture rate

    – >500,000 waveforms/s

    • Vertical resolution

    – 12-bit ADC

    – Up to 16-bits in High Res mode

    • Standard trigger types

    – Edge, Pulse Width, Runt, Timeout, Window, Logic, Setup & Hold, Rise/Fall Time, Parallel Bus, Sequence, Visual Trigger, Video (optional), RF vs. Time (optional)

    – Auxiliary Trigger ≤300 VRMS (Edge Trigger only)

    • Standard analysis

    – Measurements: 36

    – Math: Basic waveform arithmetic, FFT, and advanced equation editor

    • Optional analysis

    – Advanced Spectrum View

    – RF vs. Time traces, triggers, Spectrograms, and IQ capture

    – Mask/Limit Testing

    – Advanced Power Measurements and Analysis

    – Three-Phase Electrical Analysis (6 channel model only)

    • Optional protocol trigger, decode, and analysis

    – I2C, SPI, eSPI, I3C, RS-232/422/485/UART, SPMI, SMBus, CAN, CAN FD, LIN, FlexRay, SENT, PSI5, CXPI, USB 2.0, eUSB2, Ethernet, EtherCAT, Audio, MIL-STD-1553, ARINC 429, Spacewire, NRZ, Manchester, SVID, SDLC, 1-Wire, MDIO, and NFC

    • Arbitrary/Function Generator (optional and upgradable)

    – 50 MHz waveform generation

    – Waveform Types: Arbitrary, Sine, Square, Pulse, Ramp, Triangle, DC Level, Gaussian, Lorentz, Exponential Rise/Fall, Sin(x)/x, Random Noise, Haversine, Cardiac

    • Digital voltmeter (free with product registration)

    – 4-digit AC RMS, DC, and DC+AC RMS voltage measurements

    • Trigger frequency counter (free with product registration)

    – 8-digit

    • Display

    – 13.3 inch (338 mm) optically-bonded assembly

    – High Definition (1,920 x 1,080) resolution

    – Capacitive (multi-touch) touchscreen

    • Warranty

    – 1 year standard

 

Connectivity
  • Three USB 0 ports on the front and three more USB 2.0 host ports on the rear panel enable easy transfer of screen shots, instrument settings, and waveform data to a USB mass storage device. A USB mouse and keyboard can also be attached to USB host ports for instrument control and data entry.
  • The rear panel USB Device port is useful for controlling the oscilloscope remotely from a PC.
  • The standard 10/100/1000BASE-T Ethernet port on the rear of the instrument enables easy connection to networks and provides LXI Core 2011 compatibility.
  • The HDMI port on the rear of the instrument let you duplicate the instrument display on an external monitor or projector with 1,920 x 1,080 resolution.

 

Applications
  • Embedded serial bus analysis
  • Power integrity and power management
  • Power supply measurements and analysis
  • 3-phase power analysis
  • Automotive ECU design
  • Remote control and automation
  • Electromagnetic interference (EMI) troubleshooting

 

Reviews

There are no reviews yet.

Be the first to review “Tektronix 4 Series B MSO Mixed Signal Oscilloscope”

Your email address will not be published. Required fields are marked *

Related products