Tektronix 5 Series MSO Low Profile

• Input channels

– 8 FlexChannel® inputs

– Each FlexChannel provides:

• One analog signal that can be displayed as a waveform view, a spectral view, or both simultaneously
• Eight digital logic inputs with TLP058 logic probe
• Bandwidth (all analog channels)

– 1 GHz

• Sample rate (all analog / digital channels)

– Real-time: 6.25 GS/s

– Interpolated: 500 GS/s

• Record length (all analog / digital channels)

– 125 Mpoints (std.)

– 250, 500 Mpoints (optional)

• Waveform capture rate

– >500,000 waveforms/s

• Vertical resolution

– 12-bit ADC

– Up to 16-bits in High Res mode

– 7.6 ENOB at 1 GHz

• Standard trigger types

– Edge, Pulse Width, Runt, Timeout, Window, Logic, Setup & Hold, Rise/Fall Time, Parallel Bus, Sequence, Visual Trigger, Video (optional), RF vs. Time (optional)

– Auxiliary Trigger ≤5 VRMS, 50Ω, 200 MHz (Edge Trigger only)

• Standard analysis

– Measurements: 36

– Spectrum View: Frequency-domain analysis with independent controls for frequency and time domains RF vs. time traces (magnitude, frequency, phase)

– FastFrameTM: Segmented memory acquisition mode with maximum trigger rate >5,000,000 waveforms per second

– Plots: Time Trend, Histogram, Spectrum and Phase Noise

– Math: Basic waveform arithmetic, FFT, and advanced equation editor

– Search: Search on any trigger criteria

– Jitter: TIE and Phase Noise

• Optional analysis

– Advanced Jitter and Eye Diagram Analysis

– User-defined filtering

– Advanced Spectrum View

– RF vs. Time traces, triggers, Spectrograms, and IQ capture

– Digital Power Management

– Mask/Limit Testing

– Inverters, Motors, and Drives

– Advanced Power Measurements and Analysis

• Optional protocol trigger, decode, and analysis

– I2C, SPI, eSPI, I3C, RS-232/422/485/UART, SPMI, SMBus, CAN, CAN FD, LIN, FlexRay, SENT, PSI5, CXPI, Automotive Ethernet,MIPI C-PHY,MIPI D-PHY, USB 2.0, eUSB2, Ethernet, EtherCAT, Audio, MIL-STD-1553, ARINC 429, Spacewire, 8B/10B,NRZ, Manchester, SVID, SDLC, 1-Wire, MDIO, and NFC

• Arbitrary/Function Generator

– 50 MHz waveform generation

– Waveform Types: Arbitrary, Sine, Square, Pulse, Ramp, Triangle, DC Level, Gaussian, Lorentz, Exponential Rise/Fall, Sin(x)/x, Random Noise, Haversine, Cardiac

• Digital voltmeter

– 4-digit AC RMS, DC, and DC+AC RMS voltage measurements

• Trigger frequency counter

– 8-digit

• Video display output

– High Definition (1,920 x 1,080) resolution video output

• Connectivity

– USB Host (6 ports), USB 3.0 Device (1 port), LAN (10/100/1000 Base-T Ethernet), Display Port, DVI-D, VGA

• e*Scope®

– Remotely view and control the oscilloscope over a network connection through a standard web browser

• Warranty

– 3 years standard