| Key product |
| Analog Input Channels: 8 differential or 16 single-ended Resolution: 16 bits Input Range: ±0.1 V to ±10 V Maximum Sample Rate: 1.25 MS/s (single channel), 1.00 MS/s (multichannel aggregate) Timing Resolution: 10 ns Absolute Accuracy: Specified for different ranges with errors in ppm (parts per million) of reading and range. Input Impedance: >10 GΩ in parallel with 100 pF Analog Output Channels: 2 Resolution: 16 bits Output Range: ±10 V, ±5 V, external reference Maximum Update Rate: 2.86 MS/s (1 channel), 2.00 MS/s (2 channels) Settling Time: 2 μs for full-scale step Output Impedance: 0.2 Ω Digital I/O Channels: 24 (8 on P0, 16 on PFI/P1/P2) Voltage Levels: 0 to 5 V Direction Control: Programmable per terminal Waveform Characteristics: Supports up to 8-bit waveforms, with FIFO sizes for both generation and acquisition. Counters/Timers Number: 4 Resolution: 32 bits Measurement Types: Pulse, pulse width, period, frequency, etc. Base Clocks: 100 MHz, 20 MHz, 100 kHz internal; external up to 25 MHz Input/Output: Gate, Source, A/B/Z inputs; gate, source, pulse outputs Triggering and Synchronization Analog Triggers: Start, Reference, Pause, Sample Clock, Convert Clock Digital Triggers: Start, Pause, Sample Clock, Timebase PLL: Supports phase-locked loops with multiple reference clock locking frequencies. Interfaces PCIe: Compatible with x1, x4, x8, and x16 slots, DMA support USB: USB 2.0 Hi-Speed, DMA support Calibration and Safety Calibration: Recommended every 2 years; warm-up time of 15 minutes Safety Standards: Meets IEC 61010-1, UL 61010-1, CSA C22.2 No. 61010-1 Environmental Conditions Operating Temperature: 0 to 50 °C (PCIe), 0 to 45 °C (USB) Operating Humidity: 10 to 90% RH, non-condensing Pollution Degree: 2 Power Requirements PCIe: 4.6 W (+3.3 V), 5.4 W (+12 V) without disk drive connector USB: 11 to 30 VDC, 30 W supply |
Reviews
There are no reviews yet.