| Key product |
| General Information: Model: USB-6210 Definitions: Warranted specifications: Performance under stated conditions covered by the warranty. Typical specifications: Performance met by the majority of models. Nominal specifications: Based on design, conformance testing, or supplemental testing. Analog Input: Channels: 8 differential or 16 single-ended. ADC Resolution: 16 bits. Sample Rate: Single channel: 250 kS/s. Multichannel (aggregate): 250 kS/s. Input Range: ±0.2 V, ±1 V, ±5 V, ±10 V. Maximum Working Voltage: ±10.4 V relative to AI GND. CMRR (DC to 60 Hz): 100 dB. Input Impedance: Device on: >10 GΩ in parallel with 100 pF. Device off: 1,200 Ω. Overvoltage Protection: ±30 V (device on), ±20 V (device off). Settling Time for Multichannel Measurements: ±90 ppm of step: 4 μs convert interval. ±30 ppm of step: 5 μs convert interval. ±15 ppm of step: 7 μs convert interval. Input FIFO Size: 4,095 samples. Digital I/O and PFI: Digital I/O Channels: 4 input, 4 output. Pull-down Resistor: 47 kΩ ±1%. Input Voltage Protection: ±20 V on up to 8 pins. PFI Functionality: PFI <0..3>/Port 0: Static digital input, timing input. PFI <4..7>/Port 1: Static digital output, timing output. Digital Input Levels: VIL (input low voltage): 0 V to 0.8 V. VIH (input high voltage): 2 V to 5.25 V. General-Purpose Counters/Timers: Counters/Timers: 2. Resolution: 32 bits. Measurements: Edge counting, pulse, period, etc. Base Clocks: 80 MHz, 20 MHz, 0.1 MHz. FIFO Size: 1,023 samples. Frequency Generator: Channels: 1. Base Clocks: 10 MHz, 100 kHz. Divisors: 1 to 16. Bus Interface: USB: USB 2.0 Hi-Speed or full-speed. USB Signal Stream: 4 (for analog input, counter/timer 0, counter/timer 1). Power Requirements: Input Voltage on USB Port: 4.5 V to 5.25 V. Typical Current: 320 mA at 4.5 V (no load), 400 mA (maximum load). Physical Characteristics: Dimensions: 16.9 cm × 9.4 cm × 3.1 cm. Weight: 206 g. I/O Connectors: 2 16-position combicon. USB Connector: Series B receptacle. Calibration: Warm-up Time: 15 minutes. Calibration Interval: 1 year. Environmental: Operating Temperature: 0 ºC to 45 ºC. Storage Temperature: -20 ºC to 70 ºC. Humidity: 10% RH to 90% RH, non-condensing. Maximum Altitude: 2,000 m. Pollution Degree: 2. Safety and Compliance: Safety Voltages: Channel-to-earth ground: 11 V, Measurement Category I. Compliance Standards: IEC 61010-1, EN 61010-1, UL 61010-1, CSA C22.2 No. 61010-1. Electromagnetic Compatibility: Meets CE compliance requirements. Additional Information: Environmental Management: NI is committed to environmentally responsible design and manufacturing. Product Certifications and Declarations: Available on the NI website. |
Reviews
There are no reviews yet.